China mineral grinding mill

China mineral grinding mill, SANGHAI CLIRIK is your finst choice. HGM series mineral grinding mill is the new type mining equipment for making micro powders, fine powders,which is widely applied in the industries of metallurgy, mining, chemistry, cement, construction, refractory materials, ceramics, and so on.

——finished production fineness: 300meshes~3000meshes, 5-47 micron
——the capacity (ton/hour) ranges from 0.4T/H to 12T/H
—— five models: HGM80, HGM90, HGM100, HGM100A, and HGM125

Features of China mineral grinding mill:

Under the same finished final size and the same motor power, the capacity of China mineral grinding mill is twice as much as jet mill, mixing grinder and ball mill. The ring and roller are forged by special material with high utilization.

Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3 times longer than impact mill or turbo mill. Furthermore, the lifetime of China mineral grinding mill can reach 2-5 years. As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.

The final fineness of the grinding materials can be adjusted between 325 meshes and 3000 meshes, and the product fineness of China mineral grinding mill can reach D97≤5μm. The application of pulse deduster and muffler greatly alleviates the dust pollution and noise.

Shanghai clirik machinery co., LTD.
Should you have any questions about our grinding mill, pls do not hesitate to contact us.
Phone: 0086-21-20236178;86-18918057603
Contact person: Lily wang
Email: sales@clirik.com; lilywang@clirik.com
Address: No.19 Fuqing Rd, Pudong New Area, Shanghai201201, China.
Online consulting:
http://www.saico.net
http://www.powder-grinder.com
http://www.powder-mill.net
http://www.clirik.com

Mica pulverizer machine

There are five types of Shanghai CLIRIK mica pulverizer machine, they are HGM80, HGM90, HGM100, HGM100A and HGM125. The finished production fineness can be reached 300meshes~3000meshes, 5-47 micron. The capacity (ton/hour) ranges from 0.4T/H to 12T/H.

Features and advantages of mica pulverizer machine:
● High Efficiency
Under the same finished final size and the same motor power, the capacity of mica pulverizer machine is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
● Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization. Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3 times longer than impact mill or turbo mill. Furthermore, the lifetime can reach 2-5 years for grinding calcite carbonate.
● High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
● High fineness, flexible adjustment
The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.
●Environment-friendly
The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
●Advanced intelligent speed control device
Convenient adjusting, more uniform particle size.

Working principle of mica pulverizer machine:

HGM series mica pulverizer machine mainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.

After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe.

When the mica pulverizer machine is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers.

The high-pressure air blower constantly inhales air within the mica pulverizer machine and, in turn, the airflow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end.

Shanghai clirik machinery co., LTD.
Should you have any questions about our grinding mill, pls do not hesitate to contact us.
Phone: 0086-21-20236178;86-18918057603
Contact person: Lily wang
Email: sales@clirik.com; lilywang@clirik.com
Address: No.19 Fuqing Rd, Pudong New Area, Shanghai201201, China.
Online consulting:
http://www.saico.net
http://www.powder-grinder.com
http://www.powder-mill.net
http://www.clirik.com

How to maintain vertical powder mill?

The basic methods of vertical powder mill maintain are as the following:

1, During the application of the vertical powder mill, some personnel shall be arranged to take responsibility of management. The operators must be qualified with the required technical knowledge. Before the installation of the vertical powder mill, the persons related to the operation should receive technical training and fully understand the operating principle, performance an regulations of the vertical powder mill.

2, In order to guarantee the vertical powder mill in a normal working state, a safety operation system for the maintenance of the equipment must be established. Only in this way can the vertical powder mill be guaranteed to have a long-term and safe operation. Meanwhile, it is necessary to have the required repairing tools, lubricant and grease, spare parts and accessories.

3, After some period of running, the vertical powder mill should receive an examination and repairing.

4, If the Grinder roller are replaced by the new ones because of their application time surpassing about 500 hours, all the rolling bearings in the roller sleeves must be cleaned, and the damaged parts should be replaced. The oiling tool can be either a manual oiling pump or grease gun.

Shanghai clirik machinery co., LTD.
Should you have any questions about our grinding mill, pls do not hesitate to contact us.
Phone: 0086-21-20236178;86-18918057603
Contact person: Lily wang
Email: sales@clirik.com; lilywang@clirik.com
Address: No.19 Fuqing Rd, Pudong New Area, Shanghai201201, China.
Online consulting:
http://www.saico.net
http://www.powder-grinder.com
http://www.powder-mill.net
http://www.clirik.com